Config Router_Ports - D-Link DGS-3200 SERIES Cli Manual

Restrictions
You must have administrator privileges.
Examples
To configure the IGMP snooping querier:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g i g m p _ s n o o p i n g q u e r i e r d e f a u l t q u e r y _ i n t e r v a l 1 2 5 s t a t e e n a b l e
C o m m a n d : c o n f i g i g m p _ s n o o p i n g q u e r i e r d e f a u l t q u e r y _ i n t e r v a l 1 2 5 s t a t e e n a b l e
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

32-3 config router_ports

Purpose
Used to configure ports as router ports.
Format
config router_ports <vlan_name 32> [add|delete] <portlist>
Description
The config router_ports command allows you to designate a range of ports as being connected to
multicast-enabled routers. This will ensure that all packets with such a router as its destination will reach
the multicast-enabled router − regardless of protocol, etc.
Parameters
Parameters
vlan_name
add | delete
portlist
Restrictions
You must have administrator privileges.
Examples
To set up static router ports:
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The name of the VLAN on which the router port resides.
Specifies to add or delete the router ports .
Specifies a range of ports to be configured.
239