Config Mac_Notification Ports; Show Mac_Notification - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 # config mac_notification interval 1 historysize 500
Command: config mac_notification interval 1 historysize 500
Success.
D G S - 3 2 0 0 - 1 0 : 4 #

18-4 config mac_notification ports

Purpose
Used to configure the port's MAC address table notification status settings.
Format
config mac_notification ports [<portlist>|all] [enable(3)|disable(2)]
Description
Used to configure the port's MAC address table notification status settings.
Parameters
Parameters
portlist
all
enable
disable
Restrictions
You must have administrator privileges.
Examples
To enable MAC address table notification for Port 7:
D G S - 3 2 0 0 - 1 0 : 4 # config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
D G S - 3 2 0 0 - 1 0 : 4 #

18-5 show mac_notification

Purpose
Used to display the switch's MAC address table notification global settings.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifiy a range of ports to be configured.
To set all ports in the system, use the "all" parameter.
Enable the port's MAC address table notification.
Disable the port's MAC address table notification.
167