Config Authen Server_Group - D-Link DGS-3200 SERIES Cli Manual

Restrictions
You must have administrator privilege.
Examples
To create a user-defined authentication server group.
D G S - 3 2 0 0 - 1 0 : 4 # c r e a t e a u t h e n s e r v e r _ g r o u p m i x _ 1
C o m m a n d : c r e a t e a u t h e n s e r v e r _ g r o u p m i x _ 1
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

36-15 config authen server_group

Purpose
Used to add or remove an authentication server host to or from the specified server group.
Format
config authen server_group [tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete]
server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
Description
Add or remove an authentication server host to or from the specified server group. Built-in server group
"tacacs", "xtacacs", "tacacs+", and "radius" accept the server host with the same protocol only, but
user-defined server group can accept server hosts with different protocols. The server host must be
created first by using the CLI command "create authen server_host".
Parameters
Parameters
server_group tacacs
server_group xtacacs The built-in server group "xtacacs".
server_group tacacs+ The built-in server group "tacacs+".
server_group radius
server_group <string
15>
add
delete
server_host <ipaddr>
protocol tacacs
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The built-in server group "tacacs".
The built-in server group "radius".
A user-defined server group.
Add a server host to a server group.
Remove a server host from a server group.
The server host's IP address.
The server host's authentication protocol.
305