D-Link DGS-3200 SERIES Cli Manual page 414

packet_content_mask Specifies the frame content mask. There are a maximum of five offsets
offset
offset_chunk_1,
offset_chunk_2,
offset_chunk_3,
offset_chunk_4
class
flowlabel
source_ipv6_mask
destination_ipv6_mask Specifies the IPv6 destination IP mask.
Restrictions
You must have administrator privileges. The Switch supports a maximum of 200 profiles.
Example
To create access list rules:
D G S - 3 2 0 0 - 1 0 : 4 # c r e a t e a c c e s s _ p r o f i l e p r o f i l e _ i d 1 0 0 e t h e r n e t v l a n s o u r c e _ m a c F F - F
F - F F - F F - F F - F F d e s t i n a t i o n _ m a c 0 0 - 0 0 - 0 0 - F F - F F - F F 8 0 2 . 1 p e t h e r n e t _ t y p e
C o m m a n d : c r e a t e a c c e s s _ p r o f i l e p r o f i l e _ i d 1 0 0 e t h e r n e t v l a n s o u r c e _ m a c F F - F F - F F -
F F - F F - F F d e s t i n a t i o n _ m a c 0 0 - 0 0 - 0 0 - F F - F F - F F 8 0 2 . 1 p e t h e r n e t _ t y p e
S u c c e s s .
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
user_define_mask Specifies the L4 part mask.
that can be configured.
Each offset presents 16 bytes, the range of mask of frame is 80 bytes (5
offsets) in the first eighty bytes of frame.
Specifies the mask pattern offset of frame.
Specifies the frame content offset and mask. Up to four trunk offset and
masks in maximum can be configured. A trunk mask presents 4 bytes.
Four offset chunks can be selected out from 32 predefined offset chunks
as described below:
chunk0 chunk1
B126, B2,
B127, B3,
B0, B4,
B1 B5
Example:
offset_chunk_1 0 0xffffffff will match packet byte offset 126,127,0,1
offset_chunk_1 0 0x0000ffff will match packet byte offset 0,1
Note: Only one packet content mask profile can be created.
Specifies the IPv6 class mask.
Specifies the IPv6 flow label mask.
Specifies the IPv6 source IP mask.
chunk2 ...... chunk29 chunk30
B6, ...... B114,
B7, B115,
B8, B116,
B9 B117
414
chunk31
B118, B122,
B119, B123,
B120, B124,
B121 B125