Jwac Command List; Enable/Disable Jwac - D-Link DGS-3200 SERIES Cli Manual

42 JWAC Command List

enable jwac
disable jwac
enable jwac redirect
disable jwac redirect
enable jwac forcible_logout
disable jwac forcible_logout
enable jwac udp_filtering
disable jwac udp_filtering
enable jwac quarantine_server_monitor
disable jwac quarantine_server_monitor
config jwac quarantine_server_error_timeout
config jwac redirect {destination [quarantine_server | jwac_login_page] | delay_time <sec 0-10>}(1)
config jwac virtual_ip <ipaddr>
config jwac quarantine_server_url <string 128>
config jwac clear_quarantine_server_url
config jwac update_server [add | delete] ipaddress <network_address>
config jwac switch_http_port < tcp_port_number 1-65535> {[http | https]}
config jwac port [<portlist> | all] {state [enable | disable] | max_authenticating_host <value 0-10> |
aging_time [infinite | <min 1-1440>] | idle_time [infinite | <min 1-1440>] | block_time [<sec 0-300>]}(1)
config jwac radius_protocol [local | pap | chap | ms_chap | ms_chapv2 | eap_md5]
create jwac user <username 15> {vlan <vlanid 1-4094>}
config jwac user <username 15> {vlan <vlanid 1-4094>}
delete jwac [user <username 15> | all_users]
show jwac user
delete jwac host [ports [all | portlist] {authenticated | authenticating | blocked} | <macaddr>]
show jwac
show jwac host {ports [all | <portlist>] } {authenticated | authenticating | blocked}
show jwac port [all | <portlist>]

42-1 enable/disable jwac

Purpose
Used to enable or disable the JWAC function.
Format
enable jwac
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
360