Config Stp Mst_Ports - D-Link DGS-3200 SERIES Cli Manual

state
restricted_role
restricted_tcn
fbpdu
Restrictions
You must have administrator privilege.
Examples
To config STP ports:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s t p p o r t s 1 e x t e r n a l _ c o s t a u t o
C o m m a n d : c o n f i g s t p p o r t s 1 e x t e r n a l _ c o s t a u t o
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

16-15 config stp mst_ports

Purpose
Used to configure the port management parameters at the CIST ( instance_id = 0 ) or MSTI ( instance_id
= 1 ) level.
Format
config stp mst_ports <portlist> instance_id <value 0-15> { internal_cost [ auto | <value
1-200000000> ] | priority <value 0-240> }
Description
Internal Path Cost and Port Priority of a Port in MSTI can be separately configured to different values from
the configuration of CIST（instance_id = 0）.
Parameters
Parameters
mst_ports
portlist
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Decides if this port supports the STP functionality.
Decides if this port is to be selected as Root Port or not. The default
value is false.
Decides if this port is to to propagate a topology change or not. The
default value is false
Decides if this port will flood STP BPDU when STP functionality is
disabled.
Description
Distinguished from the parameters of ports only at the CIST level.
One of the CLI Value Types, restricts the input value and format of the
ports.
154