Config Dhcp_Relay Add; Config Dhcp_Relay Delete - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g d h c p _ r e l a y h o p s 4 t i m e 2
C o m m a n d : c o n f i g d h c p _ r e l a y h o p s 4 t i m e 2
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

44-2 config dhcp_relay add

Purpose
Used to add an IP destination address to the switch's DHCP relay table.
Format
config dhcp_relay add ipif <ipif_name 12> <ipaddr>
Description
The config dhcp_relay add command adds an IP address as a destination to forward (relay)
DHCP/BOOTP packets.
Parameters
Parameters
ipif_name
ipaddr
Restrictions
You must have administrator privileges.
Examples
To add a DHCP/BOOTP server to the relay table.
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g d h c p _ r e l a y a d d i p i f S y s t e m 1 0 . 4 3 . 2 1 . 1 2
C o m m a n d : c o n f i g d h c p _ r e l a y a d d i p i f S y s t e m 1 0 . 4 3 . 2 1 . 1 2
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

44-3 config dhcp_relay delete

Purpose
Used to delete one or all IP destination addresses from the switch's DHCP relay table.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The name of the IP interface which contains the IP address below.
The DHCP/BOOTP server IP address.
392