Reconfig; Config Sim_Group - D-Link DGS-3200 SERIES Cli Manual

T o t a l E n t r i e s : 3
D G S - 3 2 0 0 - 1 0 : 4 #

14-4 reconfig

Purpose
Used to re-Telnet to member.
Format
reconfig { member_id <value 1-32> | exit }
Description
The reconfig command is used to re-Telnet to a member.
Parameters
Parameters
member_id
Restrictions
You must have administrator privilege.
Examples
To re-Telnet to a member:
D G S - 3 2 0 0 - 1 0 : 4 # r e c o n f i g m e m b e r _ i d 1
C o m m a n d : r e c o n f i g m e m b e r _ i d 1
D G S - 3 2 0 0 - 1 0 : 4 #
L o g i n :

14-5 config sim_group

Purpose
Used to configure group information.
Format
config sim_group [ add <candidate_id 1-100> { <password> } | delete <member_id 1-32> ]
Description
The config sim_group command configures group information on the switch.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifies the serial number of a member.
131