Mac-Based Access Control Command Lists; Enable Mac_Based_Access_Control - D-Link DGS-3200 SERIES Cli Manual

41 MAC-based Access Control Command Lists

enable mac_based_access_control

disable mac_based_access_control
config mac_based_access_control {ports [<portlist> | all] state [enable | disable]|method[local |
radius] | password < passwd 16>| guest_vlan ports <portlist>}
create mac_based_access_control guest_vlan < vlan_name 32>
delete mac_based_access_control guest_vlan
create mac_based_access_control_local mac <macaddr> vlan < vlan_name 32>
config mac_based_access_control_local mac <macaddr> vlan <vlan_name 32>
delete mac_based_access_control_local [mac<macaddr> | vlan<vlan_name 32>]
show mac_based_access_control auth_mac {ports <portlist>}
show mac_based_access_control {port[<portlist> | all]}
show mac_based_access_control_local {[mac<macaddr> | vlan <vlan_name 32>]}
41-1 enable mac_based_access_control
Purpose
Used to enable MAC-Based Access Control.
Format
enable mac_based_access_control
Description
The enable mac_based_access_control command will enable the MAC-Based Access Control function.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To enable MAC-based Access Control:
D G S - 3 2 0 0 - 1 0 : 4 # e n a b l e m a c
C o m m a n d : e n a b l e m a c
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
_
b a s e d _ a c c e s s _ c o n t r o l
_
b a s e d _ a c c e s s _ c o n t r o l
349