Config 802.1X Reauth - D-Link DGS-3200 SERIES Cli Manual

Format
config 802.1x init [port_based ports [<portlist|all>] |mac_based ports [<portlist>|all] {mac_address
<macaddr>}]
Description
The config 802.1x init command used to initialize the authentication state machine of some or all.
Parameters
Parameters
port_based
mac_based
portlist
all
mac_address
.
Restrictions
You must have administrator privileges.
Examples
To initialize the authentication state machine of some or all.:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g 8 0 2 . 1 x i n i t p o r t _ b a s e d p o r t s a l l
C o m m a n d : c o n f i g 8 0 2 . 1 x i n i t p o r t _ b a s e d p o r t s a l l
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

35-12 config 802.1x reauth

Purpose
Used to reauthenticate the device connected with the port.
Format
config 802.1x reauth [port_based ports [<portlist|all>] |mac_based ports [<portlist>|all]
{mac_address <macaddr>}]
Description
The config 802.1x reauth command reauthenticates the device connected with the port. During the
reauthentication period, the port status remains authorized until failed reauthentication.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Configure the authentication as port-based mode.
Configure the authentication as MAC-based mode.
Specifies a range of ports to be configured.
All ports.
MAC address of the client.
275