Limited Multicast Ip Address Command List; Create Mcast_Filter_Profile - D-Link DGS-3200 SERIES Cli Manual

34 Limited Multicast IP Address Command List

create mcast_filter_profile profile_id <value 1-24> profile_name <name>
config mcast_filter_profile [profile_id < value 1-24>| profile_name <name> ] { profile_name
<name> | [add | delete ] <mcast_address_list>}
delete mcast_filter_profile profile_id [<value 1-24> | all]
delete mcast_filter_profile profile_name <name>
show mcast_filter_profile { profile_id <value 1-24>}
config limited_multicast_addr [ports <portlist>
profile_name <name> ] | access [permit | deny]}
show limited_multicast_addr { ports <portlist> }
config max_mcast_group ports {<portlist>
show max_mcast_group ports {ports <portlist>}

34-1 create mcast_filter_profile

Purpose
This command creates a multicast address profile.
Format
create mcast_filter_profile profile_id <value 1-24> <name>
Description
This command configures a multicast address profile. Mutliple ranges of multicast addresses can be
defined in the profile.
Parameters
Parameters
profile_id
name
Restrictions
You must have administrator privileges.
Examples
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
ID of the profile. Range is 1 to 24.
Provides a meaningful description for the profile.
]
{[add | delete ] [profile_id <value 1-24> |
}
max_group [<value 1-256>]
256