Config Vlan Advertisement; Config Gvrp - D-Link DGS-3200 SERIES Cli Manual

20-5 config vlan advertisement

Purpose
Used to enable or disable the VLAN advertisement.
Format
config vlan vlanid <vidlist> advertisement [ enable | disable ]
Description
The config vlan advertisement command enables or disables the VLAN advertisement.
Parameters
Parameters
vlan vlanid
advertisement
Restrictions
You must have administrator privileges.
Examples
To enable the VLAN default advertisement:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g v l a n d e f a u l t a d v e r t i s e m e n t e n a b l e
C o m m a n d : c o n f i g v l a n d e f a u l t a d v e r t i s e m e n t e n a b l e
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

20-6 config gvrp

Purpose
Used to set the ingress checking status and the sending and receiving of GVRP information.
Format
config gvrp [<portlist> | all] {state [enable | disable] | ingress_checking [enable |
disable] | acceptable_frame [tagged_only | admit_all] pvid<vlanid 1-4094> }
Description
The config gvrp command sets the ingress checking status and the sending and receiving of GVRP
information.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The VLAN ID of the VLAN on which you want to configure.
Join GVRP or not. If not, the VLAN can't join dynamically
178