Config Radius Delete - D-Link DGS-3200 SERIES Cli Manual

default
auth_port
acct_port
timeout <int 1-255>
retransmit <int 1-255> The count for re-transmit. The default value is 2.
Restrictions
You must have administrator privileges.
Examples
To add a new RADIUS server:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g r a d i u s a d d 1 1 0 . 4 8 . 7 4 . 1 2 1 k e y d l i n k d e f a u l t
C o m m a n d : c o n f i g r a d i u s a d d 1 1 0 . 4 8 . 7 4 . 1 2 1 k e y d l i n k d e f a u l t
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

35-18 config radius delete

Purpose
Used to delete a RADIUS server.
Format
config radius delete <server_index 1-3>
Description
The config radius delete command deletes a RADIUS server.
Parameters
Parameters
server_index
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
used to encrypt user's authentication data before being transmitted
over the Internet. The maximum length of the key is 32.
Sets the auth_port to be 1812 and acct_port to be 1813.
Specifies the UDP port number which is used to transmit RADIUS
authentication data between the switch and the RADIUS server.The
range is 1 to 65535.
Specifies the UDP port number which is used to transmit RADIUS
accounting statistics between the switch and the RADIUS server. The
range is 1 to 65535.
The time in second for waiting server reply. The default value is 5
seconds.
Description
The RADIUS server index. The range is 1 to 3.
280