Show Safeguard_Engine - D-Link DGS-3200 SERIES Cli Manual

Restrictions
You must have administrator privilege.
Examples
To configure the safeguard engine:
D G S - 3 2 0 0 - 1 0 : 4 #config safeguard_engine state enable utilization rising 50 falling 30 trap_log enable
Command: config safeguard_engine state enable utilization rising 50 falling 30 trap_log enable
Success.
D G S - 3 2 0 0 - 1 0 : 4 #

15-2 show safeguard_engine

Purpose
To show safeguard engine information.
Format
show safeguard_engine
Description
Use this command to show safeguard_engine information.
Parameters
None.
Restrictions
None.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
rising
falling
Config utilization rising threshold , the range
is between 20%-100% , if the CPU utilization
is over the rising threshold, the switch enters
exhausted mode.
Config utilization falling threshold , the range
is between 20%-100% , if the CPU utilization
is lower than the falling threshold, the switch
enters normal mode.
138