Config Jwac Quarantine_Server_Error_Timeout - D-Link DGS-3200 SERIES Cli Manual

Description
When the JWAC Quarantine Server monitor is enabled, the JWAC Switch will monitor the Quarantine
Server to ensure the server is okay. If the Switch detects no Quarantine Server, it will redirect all
unauthenticated HTTP accesses to the JWAC Login Page forcibly if the redirect is enabled and the redirect
destination is configured to be Quarantine Server.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
D G S - 3 2 0 0 - 1 0 : 4 # e n a b l e j w a c q u a r a n t i n e _ s e r v e r _ m o n i t o r
C o m m a n d : e n a b l e j w a c q u a r a n t i n e _ s e r v e r _ m o n i t o r
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

42-6 config jwac quarantine_server_error_timeout

Purpose
Used to set the Quarantine Server error timeout.
Format
config jwac quarantine_server_error_timeout <sec 5-300>
Description
When the Quarantine Server monitor is enabled, the JWAC Switch will periodically check if the Quarantine
works okay. If the Switch does not receive any response from Quarantine Server during the configured
error timeout, the Switch then regards it as not working properly.
Parameters
Parameters
<sec 5-300>
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifies the error timeout interval.
364