Config Cpu Access_Profile - D-Link DGS-3200 SERIES Cli Manual

Restrictions
You must have administrator privileges. The Switch supports a maximum of 500 access entries. The
delete cpu access_profile command can only delete the profile which is created by the CPU ACL
module.
Example
To delete access list rules:
D G S - 3 2 0 0 - 1 0 : 4 # d e l e t e c p u a c c e s s _ p r o f i l e p r o f i l e _ i d 3
C o m m a n d : d e l e t e c p u a c c e s s _ p r o f i l e p r o f i l e _ i d 3
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

46-9 config cpu access_profile

Purpose
Used to configure a CPU access list entry.
Format
config cpu access_profile profile_id <value 1-5>"
[add access_id <value 1-100>"
[ethernet
{vlan <vlan_name 32> | source_mac <macaddr 000000000000-ffffffffffff> |
destination_mac <macaddr 000000000000-ffffffffffff> |
802.1p <value 0-7> | ethernet_type <hex 0x0-0xffff> }
| ip
{vlan <vlan_name 32> | source_ip <ipaddr> | destination_ip <ipaddr> | dscp <value 0-63> |
[ icmp {type <value 0-255> | code <value 0-255>} |
igmp {type <value 0-255>} |
tcp{src_port <value 0-65535> | dst_port <value 0-65535> | urg | ack | psh | rst | syn | fin } |
udp {src_port <value 0-65535> | dst_port <value 0-65535>} |
protocol_id <value 0 - 255> {user_define <hex 0x0-0xffffffff>} ] }
| packet_content
{offset_0-15 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> |
offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>|
offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>|
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
425