Arp Command List; Create Arpentry - D-Link DGS-3200 SERIES Cli Manual

30 ARP Command List

create arpentry <ipaddr> <macaddr>
delete arpentry { <ipaddr> | all }
config arpentry <ipaddr> <macaddr>
config arp_aging time <value 0-65535>
clear arptable
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static }

30-1 create arpentry

Purpose
Used to make a static entry into the ARP table.
Format
create arpentry <ipaddr> <macaddr>
Description
The create arpentry command is used to enter an IP address and the corresponding MAC address into
the switch's ARP table.
Parameters
Parameters
ipaddr
macaddr
Restrictions
You must have administrator privileges.
Examples
To create a static ARP entry for the IP address 10.48.74.121 and MAC address 00:50:BA:00:07:36:
D G S - 3 2 0 0 - 1 0 : 4 # c r e a t e a r p e n t r y 1 0 . 4 8 . 7 4 . 1 2 1 0 0 - 5 0 - B A - 0 0 - 0 7 - 3 6
C o m m a n d : c r e a t e a r p e n t r y 1 0 . 4 8 . 7 4 . 1 2 1 0 0 - 5 0 - B A - 0 0 - 0 7 - 3 6
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The IP address of the end node or station.
The MAC address corresponding to the IP address above.
224