Config Fdb Aging_Time - D-Link DGS-3200 SERIES Cli Manual

Format
config multicast_fdb <vlan_name 32> <macaddr> [add | delete] <portlist>
Description
The config multicast_fdb command configures the multicast MAC address forwarding table.
Parameters
Parameters
vlan_name 32
macaddr
portlist
Restrictions
You must have administrator privileges.
Examples
To add multicast MAC forwarding:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g m u l t i c a s t _ f d b d e f a u l t 0 1 - 0 0 - 5 E - 0 0 - 0 0 - 0 0 a d d 1 - 5
C o m m a n d : c o n f i g m u l t i c a s t _ f d b d e f a u l t 0 1 - 0 0 - 5 E - 0 0 - 0 0 - 0 0 a d d 1 - 5
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

17-4 config fdb aging_time

Purpose
Used to configure the switch's MAC address aging time.
Format
config fdb aging_time <sec 10-875>
Description
The config fdb aging_time command is used to set the age-out timer for the switch's dynamic unicast
MAC address forwarding tables.
Parameters
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The name of the VLAN on which the MAC address resides.
The maximum name length is 32.
The MAC address that will be added or deleted to the forwarding table.
Specifies a range of ports to be configured.
158