Config Admin Local_Enable - D-Link DGS-3200 SERIES Cli Manual

Examples
To enable administrator lever privilege:
D G S - 3 2 0 0 - 1 0 : 3 # e n a b l e a d m i n
P a s s w o r d : * * * * * * * *
D G S - 3 2 0 0 - 1 0 : 4 #

36-26 config admin local_enable

Purpose
Used to configure the local enable password for the administrator level privilege.
Format
config admin local_enable <password 0-15>
Description
Configure the local enable password for the enable command. When the user chooses the "local_enable"
method to promote the privilege level, the enable password of the local device is needed.
Parameters
Parameters
password 0-15
Restrictions
You must have administrator privilege.
Examples
To configure the administrator password:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g a d m i n l o c a l _ e n a b l e
C o m m a n d : c o n f i g a d m i n l o c a l _ e b a b l e
E n t e r t h e o l d p a s s w o r d :
E n t e r t h e c a s e - s e n s i t i v e n e w p a s s w o r d : * * * * * *
E n t e r t h e n e w p a s s w o r d a g a i n f o r c o n f i r m a t i o n : * * * * * *
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The specific password.
315