Ip-Mac-Port Binding (Impb) Command List; Create Address_Binding Ip_Mac Ipaddress - D-Link DGS-3200 SERIES Cli Manual

39 IP-MAC-Port Binding (IMPB) Command List

create address_binding ip_mac ipaddress <ipaddr> mac_address <macaddr> {ports[ <portlist>| all ] |
mode[ arp| acl]}
config address_binding ip_mac ports [<portlist> | all] {state[enable| disable] |allow_zeroip [enable|
disable]}
config address_binding ip_mac ipaddress <ipaddr> mac_address <macaddr> {ports [ <portlist>| all ] |
mode [ arp| acl]}
delete address_binding [ip_mac[ipaddress<ipaddr> {mac_address <macaddr>} |all] |blocked[all |
vlan_name<vlan_name> mac_address <macaddr>]]
show address_binding [ip_mac {all| ipaddress <ipaddr> mac_address <macaddr> }|blocked {all|
vlan_name <vlan_name> mac_address <macaddr>} |ports]
enable address_binding acl_mode
disable address_binding acl_mode
enable address_binding trap_log
disable address_binding trap_log

39-1 create address_binding ip_mac ipaddress

Purpose
Used to create an IP-MAC Binding entry.
Format
create address_binding ip_mac ipaddress <ipaddr> mac_address <macaddr> {ports[ <portlist>|
all ] | mode[ arp| acl]}
Description
This command will create an IP-MAC Binding entry.
Parameters
Parameters
ipaddr
macaddr
ports
arp
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The IP address.
The MAC address.
Configure the portlist to apply, if not configure ports means
apply to all ports.
This entry is specified as an ARP mode entry. This entry will
not be added as an access entry. If not specified, the mode
332