DGS-3200-10:4#show ipv6 neighbor_cache ipif System all
Command: show ipv6 neighbor_cache ipif System all
Neighbor
-------------------------------------- ------------------ ------------ -----
FE80::20B:6AFF:FECF:7EC6
Total Entries: 1
State:
(I) means Incomplete state. (R) means Reachable state.
(S) means Stale state.
(P) means Probe state.
DGS-3200-10:4#
45-4 config ipv6 nd ns
Purpose
To configure neighbor solicitation related arguments.
Format
config ipv6 nd ns ipif <ipif_name 12> retrans_timer <value 0-4294967295>
Description
Use this command to configure neighbor solicitation related arguments.
Parameters
Parameters
ipif_name
ns retrans_timer
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Link Layer Address Interface
(D) means Delay state.
(T) means Static state.
Description
The name of the interface.
Neighbor solicitation's retransmit timer in
milliseconds. It has the same value as ra retrans_time
in the config ipv6 nd ra command. If we configure
one, the other will change too.
00-0B-6A-CF-7E-C6 System
402
State
T