Enable Loopdetect; Disable Loopdetect - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g
C o m m a n d : c o n f i g
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

31-3 enable loopdetect

Purpose
Used to globally enable loopdetect function on the switch.
Format
enable loopdetect
Description
The enable loopdetect command allows the Loop Detection Function to be globally enabled on the switch.
The default value is enabled.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To enable the loopdetect:
D G S - 3 2 0 0 - 1 0 : 4 # e n a b l e
C o m m a n d : e n a b l e
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

31-4 disable loopdetect

Purpose
Used to globally disable the loopdetect function on the switch.
Format
disable loopdetect
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
loopdetect
loopdetect
p o r t s 1 - 5 s t a t e e n a b l e
loopdetect
loopdetect
p o r t s 1 - 5 s t a t e e n a b l e
231