Config Radius Add - D-Link DGS-3200 SERIES Cli Manual

Description
The show guest vlan command allows you to show the information of a guest VLAN.
Parameter
None.
Restrictions
None.
Example
D G S - 3 2 0 0 - 1 0 : 4 # s h o w 8 0 2 . 1 x g u e s t _ v l a n
C o m m a n d : s h o w 8 0 2 . 1 x g u e s t _ v l a n
G u e s t V l a n S e t t i n g
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
G u e s t v l a n : g u e s t
E n a b l e g u e s t v l a n p o r t s : 1 - 1 0
D G S - 3 2 0 0 - 1 0 : 4 #

35-17 config radius add

Purpose
Used to add a new RADIUS server. The server with a lower index has higher authenticative
priority.
Format
config radius add <server_index 1-3> [<server_ip>|<ipv6addr>] key <passwd 32> [ default |
{ auth_port<udp_port_number 1-65535> | acct_port <udp_port_number 1-65535>| timeout <int
1-255> | retransmit <int 1-255>} ]
Description
The config radius add command adds a new RADIUS server.
Parameters
Parameters
server_index
server_ip
ipv6addr
key
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The RADIUS server index.
The IP address of the RADIUS server.
The IPv6 address of the RADIUS server.
The key pre-negotiated between switch and the RADIUS server. It is
279