Igmp Snooping Command List; Config Igmp_Snooping - D-Link DGS-3200 SERIES Cli Manual

32 IGMP Snooping Command List

config igmp_snooping [vlan_name <vlan_name 32> | vlanid <vlanid_list> |all] { host_timeout <sec
1-16711450> | router_timeout <sec 1-16711450> | leave_timer <sec 1-16711450> | state
[enable|disable] | fast_leave [enable|disable] }
config igmp_snooping querier [vlan_name <vlan_name 32> | vlanid <vlanid_list> |all]
{ query_interval <sec 1-65535> |
max_response_time <sec 1-25>| robustness_variable <value 1-255> | last_member_query_interval
<sec 1-25> | state [enable|disable] version <value 1-3> }
config router_ports <vlan_name 32> [add|delete]<portlist>
config router_ports_forbidden <vlan_name 32> [add|delete]<portlist>
enable igmp_snooping
disable igmp_snooping
show igmp_snooping {vlan <vlan_name 32> | vlanid <vlanid_list> }
show igmp_snooping group {vlan <vlan_name 32> | vlanid <vlanid_list> }
show router_ports {vlan <vlan_name 32> | vlanid <vlanid_list> } {static |dynamic|forbidden}

32-1 config igmp_snooping

Purpose
Used to configurer IGMP snooping on the switch.
Format
config igmp_snooping [vlan_name <vlan_name 32>| vlanid <vlanid_list> |all] { host_timeout <sec
1-16711450> | router_timeout <sec 1-16711450> | leave_timer <sec 1-16711450> | state
[enable|disable] | fast_leave [enable|disable] }
Description
The config igmp_snooping command configures IGMP snooping on the switch.
Parameters
Parameters
vlan_name
host_timeout
route_timeout
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The name of the VLAN for which IGMP snooping is to be configured.
all indicates all VLAN.
Specifies the maximum amount of time a host can be a member of a
multicast group without the switch receiving a host membership report.
The default is 260 seconds.
Specifies the maximum amount of time a route will remain in the
236