Mld Snooping Command List; Config Mld_Snooping - D-Link DGS-3200 SERIES Cli Manual

33 MLD Snooping Command List

config mld_snooping [ <vlan_name 32> | vlanid <vlanid_list> |all] { node_timeout <sec 1-16711450> |
router_timeout <sec 1-16711450> | done_timer <sec 1-16711450> | state [enable|disable] | fast_done
[enable|disable] }
config mld_snooping querier [ <vlan_name 32> | vlanid <vlanid_list> |all] { query_interval <sec 1-65535>
|max_response_time <sec 1-25>| robustness_variable <value 1-255> | last_listener_query_interval <sec
1-25> | state [enable|disable] | version <value 1-2>} }
config mld_snooping mrouter_ports <vlan_name 32> [add|delete]<portlist>
config mld_snooping mrouter_ports_forbidden <vlan_name 32> [add|delete]<portlist>
enable mld_snooping
disable mld_snooping
show mld_snooping {vlan <vlan_name 32>| vlanid <vlanid >}
show mld_snooping group {vlan <vlan_name 32>| vlanid <vlanid > }
show mld_snooping mrouter_ports {vlan <vlan_name 32>| vlanid <vlanid_list>}
{ [static|dynamic|forbidden]}

33-1 config mld_snooping

Purpose
Used to configurer MLD snooping on the switch.
Format
config mld_snooping [ <vlan_name 32>| vlanid <vlanid_list> |all] { node_timeout <sec 1-16711450>
| router_timeout <sec 1-16711450> | done_timer <sec 1-16711450> | state [enable|disable] |
fast_done [enable|disable] }
Description
The config mld_snooping command configures MLD snooping on the switch.
Parameters
Parameters
vlan_name
node_timeout
router_timeout
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The name of the VLAN for which MLD snooping is to be configured.
all indicates all VLANs.
Specifies the amount of time that must pass before a link node is
considered to be not a listener anymore. The default is 260 seconds.
Specifies the maximum amount of time a router will remain the
switch's can be a listener of a multicast group without the switch
receiving a node listener report. The default is 260 seconds.
246