Telnet - D-Link DGS-3200 SERIES Cli Manual

4-9 telnet

Purpose
Used to login a host that supports Telnet.
Format
telnet <ipaddr> {tcp_port <value 0-65535>}
Description
The telnet command logins a host that supports Telnet.
Parameters
Parameters
ipaddr
tcp_port
Restrictions
None.
Example
To Telnet to a host:
D G S - 3 2 0 0 - 1 0 : 4 # t e l n e t 1 0 . 1 . 1 . 1
C o m m a n d : t e l n e t 1 0 . 1 . 1 . 1
C o n n e c t i n g t o 1 0 . 1 . 1 . 1 . . .
[Press Ctrl+Y to disconnect.]
D G S - 3 2 0 0 - 1 0 : 4 # W e l c o m e t o M i c r o s o f t T e l n e t S e r v i c e
l o g i n : a d m i n i s t r a t o r
p a s s w o r d :
* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
W e l c o m e t o M i c r o s o f t T e l n e t S e r v e r .
* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
C : \ D o c u m e n t s a n d S e t t i n g s \ A d m i n i s t r a t o r > e x i t
C o n n e c t i o n t o h o s t l o s t .
D G S - 3 2 0 0 - 1 0 : 4 #
Note: Use "Ctrl+Y" to connect from the host.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The IP address of the host to login.
The Telnet port.
58