35-15 config 802.1x guest vlan
Purpose
Used to configure a guest VLAN setting.
Format
config 802.1x guest_vlan ports [<portlist>|all] state [enable | disable]
Description
The config guest vlan command will config a guest VLAN setting.
Parameter
Parameters
ports
state
Restrictions
You must have administrator privileges. If the specific port state is changed from the enabled state to the
disabled state, this port will move to its original VLAN.
Example
D G S - 3 2 0 0 - 1 0 : 4 # config 802.1x guest_vlan ports 1-8 state enable
C o m m a n d : config 802.1x guest_vlan ports 1-8 state enable
W a r ni n g! G V R P o f th e po r ts w e r e d is ab l e !
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
35-16 show 802.1x guest vlan
Purpose
Used to show the guest VLAN setting.
Format
show 802.1x guest _vlan
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
A range of ports to enable or disable the guest VLAN function
Specify the guest VLAN port state of the configured ports.
enable: join to the guest VLAN.
disable: remove from guest VLAN.
278