Config Igmp_Snooping Querier - D-Link DGS-3200 SERIES Cli Manual

leave_timer
state
fast_leave
Restrictions
You must have administrator privileges.
Examples
To configure the IGMP snooping:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g i g m p _ s n o o p i n g d e f a u l t h o s t _ t i m e o u t 2 5 0 s t a t e e n a b l e
C o m m a n d : c o n f i g i g m p _ s n o o p i n g d e f a u l t h o s t _ t i m e o u t 2 5 0 s t a t e e n a b l e f a s t _ l e a v e
e n a b l e
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

32-2 config igmp_snooping querier

Purpose
Used to configure the the time in seconds between general query transmissions, the maximum time in
seconds to wait for reports from members, the permitted packet loss that guarantees IGMP snooping.
Format
config igmp_snooping querier [ vlan_name <vlan_name 32>| vlanid <vlanid_list> |all]
{ query_interval <sec 1-65535> | max_response_time <sec 1-25> | robustness_variable <value
1-255> | last_member_query_interval <sec 1-25> | state [enable|disable] version <value 1-3> }
Description
The config igmp_snooping querier command configures IGMP snooping querier.
Parameters
Parameters
vlan_name
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
switch's can be a member of a multicast group without the switch
receiving a host membership report. The default is 260 seconds.
Leave timer. The default setting is 2.
Enable or disable IGMP snooping for the chosen VLAN.
Enable or disable IGMP snooping fast_leave function.
If enable, the membership is immediately removed when the system
receive the IGMP leave message.
Description
The name of the VLAN for which IGMP snooping querier is to be
configured.
237