Create Authen Server_Host - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 #

36-18 create authen server_host

Purpose
Used to create an authentication server host.
Format
create authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] { port <int
1-65535> | key [<key_string 254> | none] | timeout <int 1-255> | retransmit <int 1-255> }
Description
Create an authentication server host. When an authentication server host is created, the IP address and
protocol are the index. That means more than one authentication protocol service can be run on the same
physical host. The maximum supported number of server hosts is 16.
Parameters
Parameters
server_host <ipaddr>
protocol tacacs
protocol xtacacs
protocol tacacs+
protocol radius
port <int 1-65535>
key
timeout <int 1-255>
retransmit <int 1-255> The count for re-transmit. This value is meaningless for TACACS+.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The server host's IP address.
The server host's authentication protocol.
The server host's authentication protocol.
The server host's authentication protocol.
The server host's authentication protocol.
The port number of the authentication protocol for the server host. The
default value for TACACS/XTACACS/TACACS+ is 49. The default
value for RADIUS is 1812.
<key_string 254> The key for TACACS+ and RADIUS
none
The time in seconds for waiting for a server reply.
Default value is 5 seconds.
Default value is 2.
authenticaiton. If the value is null, no encryption will
apply. This value is meaningless for TACACS and
XTACACS.
No encryption for TACACS+ and RADIUS
authenticaiton. This value is meaningless for
TACACS and XTACACS.
308