Show 802.1X - D-Link DGS-3200 SERIES Cli Manual

Parameters
Parameters
local
radius_eap
Restrictions
You must have administrator privilege.
Examples
To config the 802.1x RADIUS EAP:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g 8 0 2 . 1 x a u t h _ p r o t o c o l r a d i u s _ e a p
C o m m a n d : c o n f i g 8 0 2 . 1 x a u t h _ p r o t o c o l r a d i u s _ e a p
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

35-7 show 802.1x

Purpose
Used to display the 802.1x state or configurations.
Format
show 802.1x [auth_state | auth_configuration] {ports <portlist>}
Description
The show 802.1x command displays the 802.1x state or configurations.
Parameters
Parameters
auth_state
auth_configuration
portlist
Restrictions
None.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifies the auth protocol as local.
Specifies the auth protocol as RADIUS EAP
Description
Used to display 802.1x authentication state machine of some or all
ports
Used to display 802.1x configurations of some or all ports.
Specifies a range of ports to be displayed.
270