Config Sim - D-Link DGS-3200 SERIES Cli Manual

14-6 config sim

Purpose
Used to configure the role state and parameters of discovery protocol on the switch.
Format
config sim [ [ commander { group_name <groupname 64> } | candidate ] |dp_interval <sec 30-90> |
hold_time <sec 100-255> ]
Description
The config sim command configures role state and parameters of discovery protocol on the switch.
Parameters
Parameters
commander
group_name
candidate
dp_interval
hold_time
Restrictions
You must have administrator privilege.
Examples
To transfer to commander:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s i m c o m m a n d e r
C o m m a n d : c o n f i g s i m c o m m a n d e r
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
To transfer to candidate:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s i m c a n d i d a t e
C o m m a n d : c o n f i g s i m c a n d i d a t e
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Transfer role to commander.
If commander, user can update name of group.
Transfer role to candidate.
The time in seconds between discovery.
The time in seconds the device holds the discovery result.
133