Config Jwac Virtual_Ip; Config Jwac Quarantine_Server_Url - D-Link DGS-3200 SERIES Cli Manual

42-8 config jwac virtual_ip

Purpose
Used to configure JWAC virtual IP addresses used to accept authentication requests from an
unauthenticated host.
Format
config jwac virtual_ip <ipaddr>
Description
The virtual IP of JWAC is used to accept authentication request from unauthenticated host. Only requests
sent to this IP will get response correctly.
This IP does not respond to ARP requests or ICMP packets.
Parameters
Parameters
<ipaddr>
Restrictions
You must have administrator privileges.
Example
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g j w a c v i r t u a l _ i p 1 . 1 . 1 . 1
C o m m a n d : c o n f i g j w a c v i r t u a l _ i p 1 . 1 . 1 . 1
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

42-9 config jwac quarantine_server_url

Purpose
Used to configure JWAC Quarantine Server URL.
Format
config jwac quarantine_server_url <string 128>
Description
This command allows you to configure the URL of the Quarantine Server. If the redirect is enabled and the
redirect destination is the Quarantine Server, when an HTTP request from unauthenticated host not to the
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifies the IP address of the virtual IP.
366