D-Link DGS-3200 SERIES Cli Manual page 411

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
0x0-0xffffffff>} | ipv6
{class | flowlabel| source_ipv6_mask <ipv6mask> | destination_ipv6_mask <ipv6mask>} ]
create cpu access_profile
[ ethernet
{ vlan | source_mac <macmask 000000000000-ffffffffffff> |
destination_mac <macmask 000000000000-ffffffffffff> | 802.1p | ethernet_type}
| ip
{ vlan | source_ip_mask <netmask> | destination_ip_mask <netmask> |
dscp | [icmp {type | code} | igmp {type } |
tcp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff> |
flag_mask [ all | {urg | ack | psh | rst | syn| fin} ] } |
udp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff>} |
protocol_id_mask <hex 0x0-0xff> {user_define_mask <hex 0x0-0xffffffff>}]}
| packet_content_mask
{offset_0-15 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> |
offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> |
offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> |
offset_48-63 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> |
offset_64-79 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff>}(1)
| ipv6
{class | flowlabel| source_ipv6_mask <ipv6mask> | destination_ipv6_mask <ipv6mask>} ]
profile_id <value 1-5>
delete cpu access_profile [profile_id <value 1-5> |all ]
config cpu access_profile profile_id <value 1-5>"
[add access_id <value 1-100>"
[ethernet
{vlan <vlan_name 32> | source_mac <macaddr 000000000000-ffffffffffff> |
destination_mac <macaddr 000000000000-ffffffffffff> |
802.1p <value 0-7> | ethernet_type <hex 0x0-0xffff> }
| ip
{vlan <vlan_name 32> | source_ip <ipaddr> | destination_ip <ipaddr> | dscp <value
0-63> |
[ icmp {type <value 0-255> | code <value 0-255>} |
igmp {type <value 0-255>} |
411