Create Access_Profile - D-Link DGS-3200 SERIES Cli Manual

tcp{src_port <value 0-65535> | dst_port <value 0-65535> |
udp {src_port <value 0-65535> | dst_port <value 0-65535>} |
protocol_id <value 0 - 255> {user_define <hex 0x0-0xffffffff>} ] }
| packet_content
{offset_0-15 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> |
offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff>|
offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff>|
offset_48-63 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff>|
offset_64-79 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> }
| ipv6
{class <value 0-255> | flowlabel <hex 0x0-0xfffff>|
source_ipv6 <ipv6addr> | destination_ipv6 <ipv6addr>} ]
port [<portlist> | all ] [ permit | deny] {time_range <range_name 32>}
| delete access_id <value 1-100> ]
show cpu access_profile {profile_id <value 1-5>}
enable cpu_interface_filtering
disable cpu_interface_filtering

46-1 create access_profile

Purpose
Used to create access list rules.
Format
create access_profile profile_id <value 1-200>
[ ethernet
{ vlan | source_mac <macmask 000000000000-ffffffffffff> |
destination_mac <macmask 000000000000-ffffffffffff> |
802.1p | ethernet_type } | ip
{ vlan
source_ip_mask <netmask> | destination_ip_mask <netmask> | dscp |
[icmp {type | code } | igmp {type } |
tcp {src_port_mask <hex 0x0-0xffff> | dst_port_mask(<hex 0x0-0xffff> |
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
urg | ack | psh | rst | syn | fin } |
412