Time And Sntp Command List; Config Sntp - D-Link DGS-3200 SERIES Cli Manual

12 Time and SNTP Command List

config sntp {primary <ipaddr> | secondary <ipaddr> | poll-interval <int 30-99999>}
show sntp
enable sntp
disable sntp
config time <date ddmmmyyyy > <time hh:mm:ss >
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min <minute 0-59>}
config dst [disable
| repeating {s_week <start_week 1-4,last>
| annual {s_date <start_date 1-31>
show time

12-1 config sntp

Purpose
To configure SNTP.
Format
config sntp {primary <ipaddr> | secondary <ipaddr> | poll-interval <int 30-99999>}
Description
The config sntp command changes SNTP configurations.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
| s_wday <start_day sun-sat>
| s_mth <start_mth 1-12>
| s_time <start_time hh:mm>
| e_week <end_week 1-4,last>
| e_wday <end_day sun-sat>
| e_mth <end_mth 1-12>
| e_time <end_time hh:mm>
| offset [30 | 60|90|120]}
| s_mth <start_mth 1-12>
| s_time <start_time hh:mm>
| e_date <end_date 1-31>
| e_mth <end_mth 1-12>
| e_time <end_time hh:mm>
| offset [30 | 60 | 90 | 120]}]
116