D-Link DGS-3200 SERIES Cli Manual page 423

Description
The create cpu access_profile command creates CPU access list rules.
Parameters
Parameters
vlan
source_mac
destination_mac
802.1p
ethernet_type
vlan
source_ip_mask
destination_ip_mask
dscp
icmp
igmp
Tcp
udp
protocod_id_mask
packet_content_mask
class
flowlabel
source_ipv6_mask
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifies a VLAN mask.
Specifies the source MAC mask.
Specifies the destination MAC mask.
Specifies 802.1p priority tag mask.
Specifies the Ethernet type mask.
Specifies a VLAN mask.
Specifies an IP source submask.
Specifies an IP destination submask.
Specifies the DSCP mask.
Specifies that the rule applies to ICMP traffic.
type
code
Specifies that the rule applies to IGMP traffic.
type
Specifies that the rule applies to TCP traffic.
src_port_mask
dst_port_mask
flag_mask
Specifies that the rule applies to UDP traffic.
src_port_mask
dst_port_mask
Specifies that the rule applies to the IP protocol ID traffic.
user_define_mask Specifies the L4 part mask
Specifies the packet content mask.
offset_0-15
offset_16-31 Specifies mask for packet bytes 16-31.
offset_32-47 Specifies mask for packet bytes 32-47.
offset_48-63 Specifies mask for packet bytes 48-63.
offset_64-79 Specifies mask for packet bytes 64-79.
Specifies the IPv6 class mask.
Specifies the IPv6 flow label mask.
Specifies the IPv6 source IP mask.
Specifies the ICMP packet type.
Specifies the ICMP code.
Specifies the IGMP packet type
Specifies the TCP source port mask.
Specifies the TCP destination port mask.
Specifies the TCP flag field mask.
Specifies the TCP source port mask.
Specifies the TCP destination port mask.
Specifies mask for packet bytes 0-15.
423