Config Mac_Notification - D-Link DGS-3200 SERIES Cli Manual

Description
Disable global MAC address table notification on the switch.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To disable the MAC notification function:
D G S - 3 2 0 0 - 1 0 : 4 # disable mac_notification
Command: disable mac_notification
Success.
D G S - 3 2 0 0 - 1 0 : 4 #

18-3 config mac_notification

Purpose
Used to configure the switch's MAC address table notification global settings.
Format
config mac_notification{interval <int 1-2147483647>|historysize <int 1-500>}
Description
Used to configure the switch's MAC address table notification global settings.
Parameters
Parameters
interval
historysize
Restrictions
You must have administrator privileges.
Examples
To config the switch's MAC address table notification global settings:
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The time in seconds between notifications.
This is the maximum number of entries listed in the history log used for
notification. Up to 500 entries can be specified.
166