Traffic Segmentation Command List; Config Traffic_Segmentation - D-Link DGS-3200 SERIES Cli Manual

24 Traffic Segmentation Command List

config traffic_segmentation [<portlist>|all] forward_list[null|all\<portlist>]
show traffic_segmentation {<portlist>}

24-1 config traffic_segmentation

Purpose
Used to configure the traffic segmentation.
Format
config traffic_segmentation [<portlist>|all] forward_list[null|all\<portlist>]
Description
The config traffic_segmentation command configures the traffic segmentation.
Parameters
Parameters
portlist
forward_list
Restrictions
You must have administrator privileges. The forwarding domain is restricted to Bridge Traffic only.
Example
To configure traffic segmentation:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g t r a f f i c _ s e g m e n t a t i o n 1 - 6 f o r w a r d _ l i s t 7 - 8
C o m m a n d : c o n f i g t r a f f i c _ s e g m e n t a t i o n 1 - 6 f o r w a r d _ l i s t 7 - 8
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifes a range of ports to be configured.
Specifies a range of port forwarding domains.
portlist
null
Specifes a range of ports to be configured.
Specifies a range of port forwarding domain is null.
198