Use the command to enable HTTP and configure port number.
Format
enable web {<tcp_port_number 1-65535>}
Description
The enable web command enables HTTP and configures port number.
Parameters
Parameters
tcp_port_number
Restrictions
You must have administrator privileges.
Example
To enable HTTP and configure port number:
D G S - 3 2 0 0 - 1 0 : 4 # e n a b l e w e b 8 0
C o m m a n d : e n a b l e w e b 8 0
N o t e : S S L w i l l b e d i s a b l e d i f w e b i s e n a b l e d .
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
3-17 disable web
Purpose
The switch allows you manage the switch via HTTP based management software.
Use the command to disable HTTP.
Format
disable web
Description
The disable web command disables HTTP.
Parameter
None.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The TCP port number. TCP ports are numbered between 1 and
65535. The "well-known" TCP port for the Web protocol is 80
43