Config Dst - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g t i m e _ z o n e o p e r a t o r + h o u r 2 m i n 3 0
C o m m a n d : c o n f i g t i m e _ z o n e o p e r a t o r + h o u r 2 m i n 3 0
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

12-7 config dst

Purpose
Configure Daylight Saving Time of the device.
Format
config dst [disable | repeating {s-week <start_week 1-4,last> | s-day <start_weekday sun-sat> |
s-mth <start_mth 1-12> | s-time <start_time hh:mm> | e-week <end_week 1-4,last> | e-day
<end_weekday sun-sat> | e-mth <end_mth 1-12> | e-time <end_time hh:mm> | offset [30 | 60 | 90 |
120]} | annual {s-date <start_date 1-31> | s-mth <start_mth 1-12> | s-time <start_time hh:mm> |
e-date <end_date 1-31> | e-mth <end_mth 1-12> | e-time <end_time hh:mm> | offset [30 | 60 | 90 |
120]}]
Description
The config dst command changes Daylight Saving Time settings.
Parameters
Parameters
disable
repeating
annual
s_week, e_week
s_day, e_day
s_mth, e_mth
s_time, e_time
s_date, e_date
offset
Restrictions
You must have administrator privileges.
Example
To configure time:
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Disable the DST of the switch .
Set the DST to repeating mode .
Set the DST to annual mode.
Configure the start/end week number of DST.
Configure the start/end day number of DST.
Configure the start/end month number of DST.
Configure the start/end time of DST.
Configure the start/end date of DST
Indicates number of minutes to add or to subtract during summertime.
The range of offsets are 30, 60, 90, and 120; The default value is 60.
121