Config Jwac Update_Server - D-Link DGS-3200 SERIES Cli Manual

Example
D G S - 3 2 0 0 - 1 0 : 4 # config jwac clear_quarantine_server_url
C o m m a n d : config jwac clear_quarantine_server_url
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

42-11 config jwac update_server

Purpose
Used to configure the servers that the PC may need to connect to in order to complete the JWAC
authentication.
Format
config jwac update_server [add | delete] ipaddress <network_address>
Description
The config jwac other_server command allows you to add or delete a server network address to which
the traffic from an unauthenticated client host will not be blocked by the JWAC Switch. Any servers running
ActiveX need to be able to have access to accomplish authentication. Before the client passes
authentication, it should be added to the Switch with its IP address. For example, the client may need to
access update.microsoft.com or some sites of the Anti-Virus software companies to check whether the OS
or Anti-Virus software of the client are the latest; and so IP addresses of update.microsoft.com and of
Anti-Virus software companies need to be added in the Switch.
Parameters
Parameters
add
delete
ipaddress
Restrictions
You must have administrator privileges.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Adds a network address to which the traffic will not
be blocked. Five network addresses can be added
at most.
Deletes a network address to which the traffic will
not be blocked.
Specifies the network address to add or delete.
368