Config Authen Server_Host - D-Link DGS-3200 SERIES Cli Manual

Restrictions
You must have administrator privilege.
Examples
To create a TACACS+ authentication server host, its listening port number is 15555 and the timeout value
is 10 seconds:
D G S - 3 2 0 0 - 1 0 : 4 # c r e a t e a u t h e n s e r v e r _ h o s t 1 0 . 1 . 1 . 2 2 2 p r o t o c o l t a c a c s + p o r t 1 5 5 5 5 t i m e
o u t 1 0
C o m m a n d : c r e a t e a u t h e n s e r v e r _ h o s t 1 0 . 1 . 1 . 2 2 2 p r o t o c o l t a c a c s + p o r t 1 5 5 5 5 t i m e o u
t 1 0
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

36-19 config authen server_host

Purpose
Used to configure an authentication server host.
Format
config authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] { port <int
1-65535> | key [<key_string 254> | none ] | timeout <int 1-255> | retransmit <int 1-255> }
Description
Configure an authentication server host.
Parameters
Parameters
server_host <ipaddr>
protocol tacacs
protocol xtacacs
protocol tacacs+
protocol radius
port <int 1-65535>
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The server host's IP address.
The server host's authentication protocol.
The server host's authentication protocol.
The server host's authentication protocol.
The server host's authentication protocol.
The port number of the authentication protocol for the server host.
The default value for TACACS/XTACACS/TACACS+ is 49. The
default value for RADIUS is 1812.
309