D-Link DGS-3200 SERIES Cli Manual page 18

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
In the above example, the Switch was assigned an IP address of 10.24.22.100 with a subnet mask of 255.0.0.0. The
system message Success indicates that the command was executed successfully. The Switch can now be
configured and managed via Telnet, SNMP MIB browser and the CLI or via the Web-based management agent using
the above IP address to connect to the Switch
There are a number of helpful features included in the CLI. Entering the ? command will display a list of all of the
top-level commands.
18