Show Authen Server_Host - D-Link DGS-3200 SERIES Cli Manual

Parameters
Parameters
server_host <ipaddr>
protocol tacacs
protocol xtacacs
protocol tacacs+
protocol radius
Restrictions
You must have administrator privilege.
Examples
To delete an authentication server host:
D G S - 3 2 0 0 - 1 0 : 4 # d e l e t e a u t h e n s e r v e r _ h o s t 1 0 . 1 . 1 . 2 2 2 p r o t o c o l t a c a c s +
C o m m a n d : d e l e t e a u t h e n s e r v e r _ h o s t 1 0 . 1 . 1 . 2 2 2 p r o t o c o l t a c a c s +
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

36-21 show authen server_host

Purpose
Used to display the authentication server hosts.
Format
show authen server_host
Description
Display the authentication server hosts.
Parameters
None
Restrictions
None
Examples
To display all authentication server hosts:
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The server host's IP address.
The server host's authentication protocol.
The server host's authentication protocol.
The server host's authentication protocol.
The server host's authentication protocol.
311