Config Stp Priority - D-Link DGS-3200 SERIES Cli Manual

Restrictions
You must have administrator privilege.
Examples
To configure the STP version:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s t p v e r s i o n m s t p
C o m m a n d : c o n f i g s t p v e r s i o n m s t p
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
To configure the STP version with the same value of the old configuration:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s t p v e r s i o n m s t p
C o m m a n d : c o n f i g s t p v e r s i o n m s t p
C o n f i g u r e v a l u e i s t h e s a m e w i t h c u r r e n t v a l u e .
F a i l !
D G S - 3 2 0 0 - 1 0 : 4 #

16-12 config stp priority

Purpose
Used to configure the instance priority.
Format
config stp priority <value 0-61440> instance_id <value 0-15>
Description
One of the parameters used to select the Root Bridge.
Parameters
Parameters
priority
instance_id
Restrictions
You must have administrator privilege.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The bridge priority value must be divisible by 4096.
Identifier to distinguish different STP instances.
151