Enable Mirror - D-Link DGS-3200 SERIES Cli Manual

Examples
To add mirroring ports:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g m i r r o r p o r t 6 a d d s o u r c e p o r t s 1 - 5 b o t h
C o m m a n d : c o n f i g m i r r o r p o r t 6 a d d s o u r c e p o r t s 1 - 5 b o t h
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

19-2 enable mirror

Purpose
Used to enable a previously entered port mirroring configuration.
Format
enable mirror
Description
This command, combined with the disable mirror command below, allows you to enter a port mirroring
configuration into the switch, and then turn the port mirroring on and off without having to modify the port
mirroring configuration.
Note: If the target port hasn't been set, enable mirror will not be allowed.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To enable mirroring configurations:
D G S - 3 2 0 0 - 1 0 : 4 # e n a b l e m i r r o r
C o m m a n d : e n a b l e m i r r o r
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
171