System Severity Command List; Config System_Severity - D-Link DGS-3200 SERIES Cli Manual

9 System Severity Command List

config system_severity [trap | log | all] [critical | warning | information ]
show system_severity

9-1 config system_severity

Purpose
Configure severity level control for system.
Format
config system_severity [trap | log | all] [critical | warning | information ]
Description
This command is used to configure severity level control for the system.
Parameters
Parameters
trap
log
all
critical
warning
information
Restrictions
You must have administrator privilege.
Examples
To configure severity level control for information level for a trap:
D G S - 3 2 0 0 - 1 0 : 4 # config system_severity trap information
Command: config system_severity trap information
Success.
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Configure severity level control for a trap.
Configure severity level control for a log.
Configure severity level control for a trap and a log.
Severity level = critical.
Severity level = warning.
Severity level = information.
106