Config Jwac Switch_Http_Port - D-Link DGS-3200 SERIES Cli Manual

Example
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g j w a c o t h e r _ s e r v e r a d d i p a d d r e s s 1 0 . 9 0 . 9 0 . 1 0 9 / 2 4
C o m m a n d : c o n f i g j w a c o t h e r _ s e r v e r a d d i p a d d r e s s 1 0 . 9 0 . 9 0 . 1 0 9 / 2 4
W a r n i n g : t h e r e a l a d d e d u p d a t e s e r v e r i s 1 0 . 9 0 . 9 0 . 0 / 2 4
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

42-12 config jwac switch_http_port

Purpose
Used to configure the TCP port which the JWAC Switch listens to.
Format
config jwac switch_http_port < tcp_port_number 1-65535> {[http | https]}
Description
The config jwac switch_http_port command allows you to configure the TCP port which the JWAC
Switch listens to. This port number is used in the second stage of the authentication. PC users will connect
to the page on the switch to input the user name and password. If not specified, the default port number is
80. If no protocol is specified, the protocol is HTTP.
Parameters
Parameters
< tcp_port_number 1-65535>
http
https
Restrictions
HTTP cannot run on TCP port 443, and HTTPS cannot run on TCP port 80. You must have administrator
privileges.
Example
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g j w a c s w i t c h _ h t t p _ p o r t 8 8 8 8 h t t p
C o m m a n d : c o n f i g j w a c s w i t c h _ h t t p _ p o r t 8 8 8 8 h t t p
S u c c e s s .
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
A TCP port which the JWAC Switch listens to and uses to
finish the authenticating process.
Specifies the JWAC run HTTP protocol on this TCP port.
Specifies the JWAC run HTTPS protocol on this TCP port.
369