Quarantine Server reaches the JWAC Switch, the Switch will handle this HTTP packet and send back a
message to the host ot make it access the Quarantine Server with the configured URL. When the PC
connects to the specified URL, the
name and password to do authentication.
Parameters
Parameters
<string 128>
Restrictions
You must have administrator privileges.
Example
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g j w a c q u a r a n t i n e _ s e r v e r _ u r l h t t p : / / 1 0 . 9 0 . 9 0 . 8 8 / a u t h p a g e . h t ml
C o m m a n d : c o n f i g j w a c q u a r a n t i n e _ s e r v e r _ u r l h t t p : / / 1 0 . 9 0 . 9 0 . 8 8 / a u t h p a g e . h t m l
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
42-10 config jwac clear_quarantine_server_url
Purpose
Used to clear the Quarantine Server configuration.
Format
config jwac clear_quarantine_server_url
Description
This command will clear the Quarantine Server configuration.
Parameters
None.
Restrictions
When JWAC is enabled and the redirect destination is the Quarantine Server, the Quarantine Server
cannot be cleared. You must have administrator privileges.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
quarantine server will request the PC user to input the user
Description
Specifies the entire URL of the authentication page