Config Scheduling_Mechanism - D-Link DGS-3200 SERIES Cli Manual

Parameters
class_id
weight
Restrictions
You must have administrator privileges.
Examples
To configure the traffic scheduling mechanism for each COS queue:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s c h e d u l i n g 0 m a x _ p a c k e t 3 4
C o m m a n d : c o n f i g s c h e d u l i n g 0 m a x _ p a c k e t 3 4
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

43-4 config scheduling_mechanism

Purpose
Used to configure the traffic scheduling mechanism for each COS queue.
Format
config scheduling_mechanism [strict | weight_fair]
Description
This command is use to specify how the switch handle packets in priority queues.
Parameters
Parameters
strict
weight_fair
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
This specifies which of the n+1 hardware priority queues the
config scheduling command will apply to. The four hardware
priority queues are identified by number − from 0 to n − with the
0 queue being the lowest priority.
Specifies the weights for weighted fair queueing. A value
between 0 and 255 can be specified.
Description
The highest queue first process.That is, the highest queue
should be finished first.
Use weighted fair algorithm to handle packets in priority queues.
383